Petoi describes the original Bittle X as a voice-controlled robot dog and lists more than 35 predefined actions and ten additional custom voice commands. These are maker claims, not observed successes.
Source 3○ Not tested by ROBODROMO yetRobot dogs
Petoi Bittle X — original model and V2 distinction
A programmable robot dog for learning and play. It suits coding and voice-triggered routines; original and V2 boards need different instructions, so check your exact version.
Version distinctionThe current guide describes Bittle X V2, not every original Bittle X.Manufacturer source
V2 controllerESP32-based BiBoard V1.Manufacturer source
ProgrammingBlocks, C++ and Python; feedback-servo support.Manufacturer source
VoiceMore than 35 preset actions and ten custom voice commands described.Manufacturer source
Recorded specifications, with their source limits. These are not our measurements. See all specifications and configurations
Price and availability
No current delivered price or availability has been confirmed here. Ask for a dated quote for the exact package.
Image and credit
Manufacturer image and sourceTest track0 attempts run
We have not physically tested this robot. The task plan below is a starting point, subject to the exact unit and supported functions.
See the proposed test trackOn the ROBODROMO
test track
Three proposed tasks. Ten attempts at each suitable task, with the outcome, time and human help recorded. Confirm the exact robot, software and safe setup first. These tasks are not evidence that this robot can do them.
Follow a short route through a doorway
Proposed task. 0 of 10 attempts run.
Stop at a marked point on command
Proposed task. 0 of 10 attempts run.
Repeat the route on a second permitted surface
Proposed task. 0 of 10 attempts run.
Pick a square to see what each attempt will record.
We will record the outcome, time, control mode, human help, safety stops, exact hardware and software, conditions and full video.
Proposed attempt; not run Only proceed if the exact unit supports the task and the setup is suitable. Keep remote control, scripted operation and autonomous operation separate. A completed attempt alone does not prove autonomy.What each square will show
Finished without extra helpNeeded a person’s helpFailedNot run yet
Keep the conditions visible
Name the control mode, surface, object or prompt and every intervention. Ten attempts are an initial result, not proof of long-term reliability.
Read our proposed test methodHow much do we really
know?
Separate our own tests from published claims and the limits of the evidence. The counts below describe records, not performance or confidence scores.
Tested by ROBODROMO
We have not physically tested this robot. No performance score or measured attempt is available.
See the proposed test track01 / The assessment
What the evidence supports.
Capability and readiness are separate. These written findings are not a numerical rating or a physical test.
Capability
What can it actually do?
The specific maker claims and any independent observations are listed below. We have not run our own task tests on this robot.
Read the source-based assessmentReadiness
Could you use it in real life?
Intended use: Voice-triggered quadruped routines. Dependable everyday use has not been established by the evidence reviewed. Identify original versus V2 board before instructions or capability comparisons. Voice initiation is not general autonomous behaviour.
Read the source-based assessmentA clear limit
This is a research profile based on the sources below, not a hands-on test. Maker claims remain attributed to the maker; they do not prove repeatable performance in your home or workplace.
02 / Can it actually do it?
The claims, with their context.
The wording below keeps each source’s limits. A demonstration, a maker’s claim and a repeatable real-world result are different things.
The legacy manual lists Petoi Coding Blocks, C++ and Python, and a BiBoard based on ESP32. Exact supplied board and software revision still need checking.
Source 3The V2 manual lists BiBoard V1 based on ESP32, feedback-servo support, a gyroscope and a back touch sensor.
Source 1The manual advertises more than 35 predefined actions, ten additional custom voice triggers and block, Python and C++ programming.
Source 1Petoi’s documentation hub explicitly labels Bittle X without V2 as legacy and directs V2 owners to a different manual.
Source 2Check the original sources
Every source keeps its original check date. Manufacturer information, research configurations and independent observations have different limits.
Open the source listKnow the exact robot
The name alone may not tell you which hardware, software or support you get. Keep editions and optional equipment separate.
Specifications and configuration
Technical reference
Specifications and configuration
The figures and features below come from the named sources. They are not independent measurements. Optional hardware and conflicting revisions are kept separate.
| Item | Documented detail | Evidence |
|---|---|---|
| Original Bittle X controller | The legacy manual lists Petoi Coding Blocks, C++ and Python, and a BiBoard based on ESP32. Exact supplied board and software revision still need checking. | Source 3 |
| V2 hardware distinction | The V2 manual lists BiBoard V1 based on ESP32, feedback-servo support, a gyroscope and a back touch sensor. | Source 1 |
An omitted measurement is unknown in this review, not zero or unsupported. Check the exact hardware edition and documentation before ordering or designing around it.
The current guide describes Bittle X V2, not every original Bittle X.
Manufacturer sourceESP32-based BiBoard V1.
Manufacturer sourceBlocks, C++ and Python; feedback-servo support.
Manufacturer sourceMore than 35 preset actions and ten custom voice commands described.
Manufacturer sourceThe exact model and configuration
The exact model
Meet Petoi Bittle X — original model and V2 distinction
The original model is Petoi Bittle X. The maker’s legacy manual and curriculum identify the original separately from Bittle X V2; the latter uses a different hardware guide. This page preserves the original model and identifies V2 statements as related-version information, not proof about every original unit. The V2+Arm attachment is a configuration, not a separate generation.
Further assessment notes
Setup, support and daily use
04 / Living with it
Right robot, right expectations.
What ownership could involve
Start by recording the board and servo version, supplied accessories and whether the unit is a kit or pre-assembled. Keep the matching instructions with that identity. A calibration error can resemble a programming failure, so review mechanical setup before judging a gait. In a future test, repeat a named movement on a recorded surface and log falls, manual repositioning and changes to joint offsets. Voice-triggered routines should be tested separately from any claim of conversation or free-form understanding. Confirm the exact replacement servo and regional service route; a common product-family name is not fitment evidence. Current price, delivered cost and support duration remain unverified for the chosen configuration.
Support, software and repairs
Petoi publishes firmware, calibration, API and battery documentation with community support. Confirm board and servo generation before ordering replacements or flashing firmware. The V2 guide adds feedback servos and a back-touch sensor; do not assume an earlier Bittle X contains them. Check exact bundle, battery condition and current warranty.
Questions still open
What needs checking before you decide.
- V2 functionality is not established for legacy Bittle X hardware.
- No independent movement, voice-recognition or durability test assessed.
- Generic FAQ prices differ from other maker offers; no price promoted as a verified configuration-specific offer.
- Petoi states its original curriculum is for Bittle X and identifies a labelled BiBoard V1 as Bittle X V2; inspect the actual unit before applying either guide.
See it in action
Our filmed attempts will appear after testing. Existing footage below keeps its original description and limitations.
See the robot
Introduction to Bittle Robot Dog Family | Petoi Coding Blocks Robotics Curriculum 01 | PetoiCamp
Play video
Petoi’s introduction to the wider Bittle family. It is useful background, but does not establish that original Bittle X and Bittle X V2 share every demonstrated feature.
Before you buy
Get these answered in writing by the seller. Tick them off as you go.
0 of 6 answered
Your checklist records your progress. A tick is not verification by ROBODROMO.
Sources and checks
A check date tells you when a source was read. It does not mean every claim, price or offer is unchanged today.
Sources and checks
03 / Recorded evidence
The latest checks on file.
Dates below describe the recorded checks. They do not mean the manufacturer’s page was checked today.
- guide.petoi.com Source checked 2026-10-27
- docs.petoi.com Source checked 2026-10-27
- bittle-x.petoi.com Source checked 2026-10-29
- learning.petoi.com Source checked 2026-10-29
-
Manufacturer specifications and support
Exact-model specification/support passages in official source; numerical claims are manufacturer figures.
Source checked 2026-10-31 -
Official page linking this video
Video association checked against the maker page; not a complete playback or performance assessment.
Source checked 2026-10-31
No recorded sources in this filter.
How sure are we?
6 linked sources. Read the claims and their limits below. A source count is not a confidence score.
Keep this robot on your radar.
Register your interest in this model and receive ROBODROMO’s robot updates.
We’ll record your interest. Personalised weekly alerts are not yet available. Privacy policy