The H2 Plus parameter table lists optional Sharpa Wave hands with 22 active degrees of freedom per hand and optional wrist cameras; supplied kit and hand configuration are unverified.
Source 1○ Not tested by ROBODROMO yetHumanoids
Unitree H2 Plus
A full-size humanoid for researchers building movement and handling tasks. Hands are optional, and extra computing hardware does not make it an independent household assistant.
Standing dimensions and weight1,820 × 456 × 218 mm; about 70 kg with batterySource 1
Body joints31 joint motors; 6 per leg, 7 per arm, 3 waist and 2 headSource 1
Arm payloadRated approximately 7 kg; peak approximately 15 kg, subject to configuration and postureSource 1
Body1,820 × 456 × 218 mm; approximately 70 kg before configuration confirmation.Manufacturer source
Recorded specifications, with their source limits. These are not our measurements. See all specifications and configurations
Price and availability
No current delivered price or availability has been confirmed here. Ask for a dated quote for the exact package.
Image and credit
Image retained from this robot’s existing profile.Test track0 attempts run
We have not physically tested this robot. The task plan below is a starting point, subject to the exact unit and supported functions.
See the proposed test trackOn the ROBODROMO
test track
Three proposed tasks. Ten attempts at each suitable task, with the outcome, time and human help recorded. Confirm the exact robot, software and safe setup first. These tasks are not evidence that this robot can do them.
Complete one documented movement or manipulation task
Proposed task. 0 of 10 attempts run.
Repeat the task from the same starting setup
Proposed task. 0 of 10 attempts run.
Record all help needed to start and finish
Proposed task. 0 of 10 attempts run.
Pick a square to see what each attempt will record.
We will record the outcome, time, control mode, human help, safety stops, exact hardware and software, conditions and full video.
Proposed attempt; not run Only proceed if the exact unit supports the task and the setup is suitable. Keep remote control, scripted operation and autonomous operation separate. A completed attempt alone does not prove autonomy.What each square will show
Finished without extra helpNeeded a person’s helpFailedNot run yet
Keep the conditions visible
Name the control mode, surface, object or prompt and every intervention. Ten attempts are an initial result, not proof of long-term reliability.
Read our proposed test methodHow much do we really
know?
Separate our own tests from published claims and the limits of the evidence. The counts below describe records, not performance or confidence scores.
Tested by ROBODROMO
We have not physically tested this robot. No performance score or measured attempt is available.
See the proposed test track01 / The assessment
What the evidence supports.
Capability and readiness are separate. These written findings are not a numerical rating or a physical test.
Capability
What can it actually do?
The specific maker claims and any independent observations are listed below. We have not run our own task tests on this robot.
Read the source-based assessmentReadiness
Could you use it in real life?
Intended use: Humanoid manipulation development. Dependable everyday use has not been established by the evidence reviewed. Optional hands and computing must be matched to the tested package. Promotional hand claims cannot define base capability.
Read the source-based assessmentA clear limit
This is a research profile based on the sources below, not a hands-on test. Maker claims remain attributed to the maker; they do not prove repeatable performance in your home or workplace.
02 / Can it actually do it?
The claims, with their context.
The wording below keeps each source’s limits. A demonstration, a maker’s claim and a repeatable real-world result are different things.
Unitree lists secondary development and a 12-month warranty, subject to its manual and warranty terms. Some sample functions remain in development and testing.
Source 2Unitree describes Isaac TeleOp, GR00T, simulation and middleware workflows. These are development tools, not proof that a supplied robot autonomously performs a household task.
Source 1Unitree’s shop asks customers to contact sales and says customs duties are excluded; the final configuration, price and UK landed cost are not verified.
Source 3The maker promotes 75 total body-and-hand degrees of freedom. Adding 31 body joints plus two 22-DOF hands also totals 75, but the page does not establish that this interpretation or both hands apply to the supplied kit.
Source 4Check the original sources
Every source keeps its original check date. Manufacturer information, research configurations and independent observations have different limits.
Open the source listKnow the exact robot
The name alone may not tell you which hardware, software or support you get. Keep editions and optional equipment separate.
Specifications and configuration
Model detail
Specifications and configuration
Figures below retain their source and configuration limits. Manufacturer specifications are not independent performance results.
1,820 × 456 × 218 mm; about 70 kg with battery
Source 131 joint motors; 6 per leg, 7 per arm, 3 waist and 2 head
Source 1About 3 hours, maker estimate; operating conditions unspecified. Battery capacity is not established in the retained H2 Plus source.
Source 2Rated approximately 7 kg; peak approximately 15 kg, subject to configuration and posture
Source 11,820 × 456 × 218 mm; approximately 70 kg before configuration confirmation.
Manufacturer sourceJetson T5000 with 128 GB unified memory; 2,070 sparse FP4 TFLOPS claimed.
Manufacturer source15 Ah / 0.972 kWh; about three hours.
Manufacturer source7 kg rated and 15 kg peak payload.
Manufacturer sourceOptional Sharpa Wave hands: 22 active joints per hand.
Manufacturer sourceThe exact model and configuration
The exact model
Meet Unitree H2 Plus
Unitree H2 Plus, distinct from H2, H2-D and H2-A. Exact hardware revision, delivered software and kit contents are unknown. Do not transfer specifications or fitment across models.
Further assessment notes
Setup, support and daily use
04 / Living with it
Right robot, right expectations.
What ownership could involve
Confirm exact hand and camera options, software versions, SDK and model licences, compute and simulator dependencies, training data, network routes, controller, setup, maintenance, transport, warranty and UK support. Unitree asks users to keep a sufficient distance from the robot; it does not quantify the distance in the retained passage. Obtain a task-specific safety assessment and payload-versus-posture limits. Keep FP4 sparse compute figures separate from other numerical precisions when comparing platforms; the number alone does not measure task performance.
Support, software and repairs
The detailed table marks wrist cameras and hands optional although headline copy describes them together. Confirm the purchased package and final weight. Thirty-one body joints plus two 22-joint hands gives the advertised 75 total only with those hands. Twelve-month warranty is listed; obtain service, spare-part and developer terms. Component grip ratings are not robot payload.
Questions still open
What needs checking before you decide.
- No footage watched; control mode, attempt counts and reliability unknown.
- Promotional hand claims and optional component table require kit-level reconciliation.
- No part compatibility or shared revision inferred from H2.
- No public transaction price or UK delivery terms verified.
See it in action
Our filmed attempts will appear after testing. Existing footage below keeps its original description and limitations.
○ No test footage yet
Our filmed attempts will appear here.
No video is embedded in this profile. Check the source list for the available evidence.
Before you buy
Get these answered in writing by the seller. Tick them off as you go.
0 of 6 answered
Your checklist records your progress. A tick is not verification by ROBODROMO.
Sources and checks
A check date tells you when a source was read. It does not mean every claim, price or offer is unchanged today.
Sources and checks
03 / Recorded evidence
The latest checks on file.
Dates below describe the recorded checks. They do not mean the manufacturer’s page was checked today.
- unitree.com Source checked 2026-10-27
- unitree.com Source checked 2026-10-27
- shop.unitree.com Source checked 2026-10-27
- unitree.com Source checked 2026-10-27
-
Manufacturer specifications and support
Exact-model specification/support passages in official source; numerical claims are manufacturer figures.
Source checked 2026-10-31
No recorded sources in this filter.
How sure are we?
5 linked sources. Read the claims and their limits below. A source count is not a confidence score.
Keep this robot on your radar.
Register your interest in this model and receive ROBODROMO’s robot updates.
We’ll record your interest. Personalised weekly alerts are not yet available. Privacy policy