Unitree lists secondary development for G1+ EDU; the standard G1+ column shows a slash. Its meaning and access on a supplied standard unit remain unconfirmed.
Source 1○ Not tested by ROBODROMO yetHumanoids
Unitree G1+
A humanoid development platform offered in standard and EDU versions. Development access and warranty differ.
Standing dimensions1340 × 450 × 200 mm, both variantsSource 1
Weight including batteryApproximately 35 kg G1+; approximately 35 kg or more EDUSource 1
Joint degrees of freedom25 G1+; 25–45 EDU, configuration-dependentSource 1
Waist1 degree of freedom; EDU offers an optional 3-degree waistSource 1
Recorded specifications, with their source limits. These are not our measurements. See all specifications and configurations
Price and availability
G1+ US $15,000 excluding tax and shipping, 8 months; EDU contact sales, 18 months. Confirm terms and availability.
A recorded offer can change. Check its source date below and confirm the exact package, delivery region and total cost with the seller.
Check the original sources
Image and credit
Manufacturer image and sourceTest track0 attempts run
We have not physically tested this robot. The task plan below is a starting point, subject to the exact unit and supported functions.
See the proposed test trackOn the ROBODROMO
test track
Three proposed tasks. Ten attempts at each suitable task, with the outcome, time and human help recorded. Confirm the exact robot, software and safe setup first. These tasks are not evidence that this robot can do them.
Complete one documented movement or manipulation task
Proposed task. 0 of 10 attempts run.
Repeat the task from the same starting setup
Proposed task. 0 of 10 attempts run.
Record all help needed to start and finish
Proposed task. 0 of 10 attempts run.
Pick a square to see what each attempt will record.
We will record the outcome, time, control mode, human help, safety stops, exact hardware and software, conditions and full video.
Proposed attempt; not run Only proceed if the exact unit supports the task and the setup is suitable. Keep remote control, scripted operation and autonomous operation separate. A completed attempt alone does not prove autonomy.What each square will show
Finished without extra helpNeeded a person’s helpFailedNot run yet
Keep the conditions visible
Name the control mode, surface, object or prompt and every intervention. Ten attempts are an initial result, not proof of long-term reliability.
Read our proposed test methodHow much do we really
know?
Separate our own tests from published claims and the limits of the evidence. The counts below describe records, not performance or confidence scores.
Tested by ROBODROMO
We have not physically tested this robot. No performance score or measured attempt is available.
See the proposed test track01 / The assessment
What the evidence supports.
Capability and readiness are separate. These written findings are not a numerical rating or a physical test.
Capability
What can it actually do?
The specific maker claims and any independent observations are listed below. We have not run our own task tests on this robot.
Read the source-based assessmentReadiness
Could you use it in real life?
Intended use: Humanoid movement and development. Dependable everyday use has not been established by the evidence reviewed. G1+ and EDU differ in developer access and warranty. G1 evidence is not automatically G1+ evidence.
Read the source-based assessmentA clear limit
This is a research profile based on the sources below, not a hands-on test. Maker claims remain attributed to the maker; they do not prove repeatable performance in your home or workplace.
02 / Can it actually do it?
The claims, with their context.
The wording below keeps each source’s limits. A demonstration, a maker’s claim and a repeatable real-world result are different things.
The page describes external power for longer operation and touch, audio and interaction features; exact supplied functions and operating conditions need verification.
Source 1Unitree says some example functions are still in development and testing.
Source 1Unitree’s G1+ comparison lists 25 joint-motor degrees of freedom for G1+ and 25–45 for G1+ EDU. Its EDU column describes different dexterous hands and additional wrist degrees of freedom; the actual supplied configuration must be checked.
Source 2Check the original sources
Every source keeps its original check date. Manufacturer information, research configurations and independent observations have different limits.
Open the source listKnow the exact robot
The name alone may not tell you which hardware, software or support you get. Keep editions and optional equipment separate.
Specifications and configuration
Model detail
Specifications and configuration
Figures below retain their source and configuration limits. Manufacturer specifications are not independent performance results.
1340 × 450 × 200 mm, both variants
Source 1Approximately 35 kg G1+; approximately 35 kg or more EDU
Source 125 G1+; 25–45 EDU, configuration-dependent
Source 11 degree of freedom; EDU offers an optional 3-degree waist
Source 1Binocular and chest wide-angle cameras, 3D laser radar, six microphones; Wi-Fi 6 and Bluetooth 5.2
Source 19000 mAh quick-release; approximately 2 hours claimed, test conditions unspecified
Source 1G1+ US $15,000 excluding tax and shipping, 8 months; EDU contact sales, 18 months. Confirm terms and availability.
Source 11,340 × 450 × 200 mm standing; approximately 35 kg including battery.
Manufacturer sourceStandard 25; EDU 25–45 depending on options.
Manufacturer source9 Ah quick-release battery; approximately two hours.
Manufacturer sourceApproximately 3 kg standard or 4 kg EDU, posture-dependent.
Manufacturer sourceStereo camera, chest wide-angle camera and 3D LiDAR.
Manufacturer sourceThe exact model and configuration
The exact model
Meet Unitree G1+
Unitree names G1+ and G1+ EDU separately and describes G1+ as an evolution of G1. Do not transfer specifications, components or fitment from G1. Confirm the actual variant and revision before comparing or ordering.
Further assessment notes
Setup, support and daily use
04 / Living with it
Right robot, right expectations.
What ownership could involve
Confirm version, actual scope of software and accessories, regional delivery, tax, shipping, warranty exclusions and support before purchase. EDU is the listed secondary-development variant; expertise and setup requirements need clarification. Unitree lists Wi-Fi, Bluetooth, cameras, microphones, OTA updates and manual controller; network dependence, data handling, subscriptions, maintenance and spare parts remain unverified. Unitree warns users to keep sufficient distance and use caution; individual users should understand limitations before purchase. External power does not establish safe unattended operation. Confirm which example behaviours are supplied and distinguish purchased hardware from optional development access.
Support, software and repairs
The table lists eight-month standard and eighteen-month EDU warranties, subject to the warranty brochure. Secondary development is EDU-only. Confirm hands, waist, compute and battery spares. Some illustrated functions remain under development. G1+ is not the original G1, so match firmware and hardware revisions before comparing parts or capabilities.
Questions still open
What needs checking before you decide.
- No footage directly reviewed; demonstrations and control modes remain unassessed.
- No measured task success, recovery or independent everyday-use evidence.
- Price is a maker headline, not a verified UK delivered offer or Robodromo stock.
- No fitment or interchangeability with G1 established.
See it in action
Our filmed attempts will appear after testing. Existing footage below keeps its original description and limitations.
See the robot
Unitree G1+ — manufacturer presentation
Presentation media linked by the manufacturer for this model. It may include staged demonstrations or illustrative material; it does not establish autonomous reliability or the functions supplied in every configuration.
Before you buy
Get these answered in writing by the seller. Tick them off as you go.
0 of 6 answered
Your checklist records your progress. A tick is not verification by ROBODROMO.
Sources and checks
A check date tells you when a source was read. It does not mean every claim, price or offer is unchanged today.
Sources and checks
03 / Recorded evidence
The latest checks on file.
Dates below describe the recorded checks. They do not mean the manufacturer’s page was checked today.
- unitree.com Source checked 2026-10-27
-
unitree.com
Mechanical Dimensions comparison
Source checked 2026-10-29 -
Manufacturer specifications and support
Exact-model specification/support passages in official source; numerical claims are manufacturer figures.
Source checked 2026-10-31 -
Official page linking this video
Video association checked against the maker page; not a complete playback or performance assessment.
Source checked 2026-10-31
No recorded sources in this filter.
How sure are we?
4 linked sources. Read the claims and their limits below. A source count is not a confidence score.
Keep this robot on your radar.
Register your interest in this model and receive ROBODROMO’s robot updates.
We’ll record your interest. Personalised weekly alerts are not yet available. Privacy policy